The configuration tag has no usage guidance.
0
votes
0answers
14 views
SpamAssassin configuration question about spam filters and blacklist [migrated]
Hello and thanks in advance...
I'd like to know if it's possible to change the order of the way SpamAssassin evaluates email. I believe that it works like this -
Q: Is it possible to reconfigure ...
1
vote
0answers
20 views
nginx rewrite rule not applied (using contao cms)
I am trying to make a redirect for https://mypage.com/foo to https://mypage.com/bar while still keeping https://mypage.com/foo in the browser url. I have tried several combinations of different ...
1
vote
0answers
43 views
Rsync from Cpanel to Synology
I'm trying to add a Rsync destination for backup in whm, but I keep getting this error when validating
Error:Validation for transport “NAS2” failed: Can't ssh to
[the Ip Address]: unable to ...
2
votes
2answers
43 views
Is “Legacy Backup” in WHM necessary when you're running out of space?
Lately I noticed that that my server's disk is running out of space, and that the cpbackup folder in /backup was around 277 GB. I have the Backup Configuration enabled, and then I checked the Legacy ...
3
votes
1answer
471 views
HTTP to HTTPS redirect for a specific domain through web.config
I'm trying to do a HTTP to HTTPS redirect on a GoDaddy web hosting platform. I have the Windows hosting platform and I'm editing the web.config file. There are multiple domains under this hosting ...
2
votes
0answers
166 views
Specify the order and priority of LocationMatch directives from different Apache conf files
I have custom modules loaded in Apache HTTP Server that handles different URL's i.e each module handles a specific URL depending upon the LocationMatch directive defined in each of these modules.
The ...
7
votes
2answers
367 views
Explicit differences between <Directory> and <DirectoryMatch> (and other <*Match> directives)
Preface
I'm very much a neophyte regarding webservers. I'm setting up an Apache2 server and currently poring over the documentation.
I noticed that the <Directory>, <Location>, and <...
3
votes
2answers
112 views
Is it possible to block cookies that are set by externally hosted content?
Is it possible to block cookies that are set by externally hosted content embedded in a page?
For example if I embed an image from a CDN, the response for this image may contain a Set-Cookie header, ...
3
votes
2answers
146 views
How can the index.html file be served from a sub directory of the DocumentRoot without using system level links?
How can the index.html file be served from a sub directory of the DocumentRoot without using system level links?
For example:
Let the document root of an apache 2.4 virtual host be dirA
Let the the ...
0
votes
2answers
931 views
Why doesn't Apache allow access to files outside the web root --from within index.html?
As the title states..
I have the following organization to my project but am unable to access the related CSS and JavaScript files from within my HTML code --unless I create symbolic links from the ...
1
vote
0answers
38 views
Use remote Tomcat/Solr for BlueSpice ExtendedSearch
Is it possible to configure the BlueSpice ExtendedSearch extension to connect to a remote Apache Tomcat/Solr instance instead of installing all of that on the same machine that runs BlueSpice?
I ...
0
votes
0answers
80 views
configuration error: couldn't check user: /
I am getting the following error when trying to access documents on a new instance of Apache2:
configuration error: couldn't check user: /
The main oddity of my setup is that I have two virtual ...
0
votes
0answers
9 views
Flexible, multi-site hosting solution [duplicate]
I'm looking into the best solution going forward for our server configuration. Currently we have a reseller package with our provider. While it does the job it's somewhat limited. Therefore i'm ...
0
votes
2answers
97 views
Basic DNS and URL Redirect for just a web server
I am unable to find the proper setup of DNS records with URL Redirect service for a basic web server where:
Any URL with www.Example.com should go to server with IPv4 number 1.2.3.4
Any URL for ...
0
votes
0answers
14 views
Nginx - inherit configuration for executing Perl
Is possible to inherit rule of executing Perl files (*.pl) for whole server? I mean that I will declare block "location ~ .pl$ {}" only once and it will inherit for all aliases.
Because now if I want ...
2
votes
0answers
29 views
Environment specific client-side config file
I'm developing a WebRTC app where the endpoints along with some other options are different for production and development. I was handed this project so one of codebases uses Nodejs and the other uses ...
2
votes
1answer
605 views
Configure Apache to redirect all requests to index.html?
A CentOS 7 server is hosting a web application in /var/www/someapp/public_html. Requests for mydomain.com get served the file located at /var/www/someapp/public_html/index.html. The user can then ...
1
vote
1answer
148 views
Nginx deny-all fails to execute PHP code in 403.html
I want to deny access to some directories and files, so I use the deny_all option to return a 403.html page. However, it does not allow me to execute any PHP code in that page.
Something to do with "...
2
votes
3answers
2k views
In what path I can find the .crt file for Let's Encrypt SSL?
I'm trying to find the SSL .crt file that was installed on my Ubuntu server using Let's Encrypt.
I used this commands below for installing Let's Encrypt free SSL:
$sudo apt-get update
$sudo apt-get ...
0
votes
1answer
36 views
Add content to start of all requests
In a .htaccess file or another server configuration file, is there a way to add content to the start of all requests, for example:
index.html
World!
.htaccess or another server configuration file
#...
2
votes
0answers
23 views
Option for allowing new users to post to a Phpbb version 3 forum
I am trying to allow new users to post to the forum. It is not showing me the option of turning this off or on in the settings.
1
vote
0answers
98 views
How to store configuration settings in a asp.net mvc application? [closed]
Don't know if this is the right place to ask this question but here it goes.
We are looking to developing an online ASP.NET MVC application. One module of this app is storing the application settings ...
1
vote
1answer
105 views
Access resources of secondary server running different port apache2
I'm currently running a main server from a raspberry pi (32 GB) and a secondary server (4 TB) running as the file storage server. Both servers are running Debian Linux with Apache2 installed. I've ...
1
vote
1answer
150 views
Using nginx to host roundcube on root domain, while hosting phpmyadmin from sub directory
I have my domain setup to host roundcube at the root domain just fine, using root /www/roundcube in the vhost config, but when I attempt to add another location for phpmyadmin using root /www/...
1
vote
0answers
38 views
/ci3/contact not found after ci3-fire-start installation
I installed apache2 on my ubuntu 16 and the localhost folder is located in /var/www/html/
Downloaded ci3-fire-starter and extracted the folder to /var/www/html/ci3-fire-starter-folder
I also ...
1
vote
0answers
1k views
Apache 2.4 on Windows Server 2012 R2 - Error 1053
I have installed Apache 2.4 on a Windows Server 2012 R2. It starts fine from the command line, and I can view test pages and what not.
I then used the command httpd.exe -k install to set it up as a ...
1
vote
1answer
361 views
How to configure URI in Nginx to serve different web app than in the main domain?
I have CMS running on domain.tld.
Now I would like to configure Nginx to server another app from domain.tld/app.
CMS in main domain shouldn't handle requests made to domain.tld/app.
Can this be ...
1
vote
1answer
63 views
Redirect 301 to a folder on the server?
I wish to 301 redirect my conf file located at /etc/apache2/sites-available to a different folder on the server itself. But when I added:
Redirect 301 / /var/www/web/public_html
to the conf file and ...
2
votes
1answer
321 views
What does mask spring authentication nginx configuration do?
I have the following setting in my nginx.conf but I am not sure what it does. I copied it from a Google search.
location / {
set $tempRequest $request;
if ($tempRequest ~ (.*)...
3
votes
1answer
153 views
Are there any reasons to not to set speed sample rate to 100 in Google Analytics?
While searching for performance problems, I found out that we have several entries where our page load time is zero or extremly high (>150s).
After a short research I found out that this happens ...
3
votes
1answer
315 views
Is 21 seconds too little for a connection timeout instead of the Apache default of 300 seconds?
I currently have apache timeout incomplete requests after 21 seconds because I don't want bad bots holding up the available connection slots, and I feel people would rather wait 21 seconds for a slot ...
1
vote
1answer
56 views
Apache .conf files not working. Apache restarts even without ANY conf files
For some reason, my apache instances have stopped updating their conf files. I am able to reboot apache without any errors logged and apache will not recognize any changes.
I have gone so far as to ...
1
vote
1answer
275 views
Default server name nginx
A server is hosting several website each having its own domain name. Nginx is used the reverse proxy.
When a domain name is pointing to the IP of the server and that no server_name is specified nginx ...
1
vote
0answers
42 views
Problem in Greenstone Digital Library Software search output
I hope this is right community to post this question. So In full text search the Greenstone Digital Library Software correctly retrieve the newspapers containing the searched term both in HTML and ...
2
votes
1answer
60 views
Why would a url of example.com/n (where n is the same number repeated 500x) return a 403 error?
I'm trying to add new functionality to my site which involves passing a whole bunch of parameters (could be hundreds of parameters) all encoded in base64 format. When I attempt the new URL I get an ...
0
votes
1answer
28 views
how to kill program that displays webpages in fastcgi/apache
I'm beginning to think PHP contributes to extra milliseconds of waiting time. After all, my website is mostly meant for showing photos and I like to have things work fast and so does google.
I was ...
1
vote
1answer
108 views
mediawiki user can't create his user page
I got a MediaWiki, and almost all is working fine, but when i try to edit a page with an user, the page `?title=User:{username}"
I got this message
There is currently no text in this page. You can ...
1
vote
0answers
79 views
apache/php settings to optimize website for long distance clients
Contrary to what many suggest, I decided to increase my keep-alive in apache from 1 to 5 seconds and to a maximum of 100 keep-alive requests per keep-alive connection from any one IP address. I also ...
2
votes
0answers
751 views
Nginx aliases and proxy_pass
I'm using nginx as web front-end and apache2 as web back-end. Apache runs several websites locally and nginx access them.
At the moment, different sub-domains are hosted, but I want to migrate them ...
6
votes
2answers
22k views
Have disabled apache site config file 000-default.conf, but it still seems active. Why?
I added a file mysite.conf to my apache sites-available folder with the correct settings, then enabled it and reloaded apache, and it isn't working. I want to disable the default site config as ...
0
votes
1answer
265 views
Nginx Php-Fpm Global Configuration
So, ive got everything set with 6 wp websites sitting on my lemp stack.
I have noticed that every single one of their nginx configurations are the same.
Is there a way I can globalize said ...
0
votes
1answer
30 views
Sites-available inheritance
I'm setting up a subdomain for mobile content that will be hosted on the same server but in a separate root directory (/www/main and /www/mobile).
I'm trying to configure the sites-available .conf ...
0
votes
1answer
193 views
FTP connection timeout forces reconnect before every action
I'm uploading and modifying files on my Apache 2 server via FileZilla and after I perform any action, the connection times out after five seconds, so it keeps having to reconnect every time I perform ...
1
vote
1answer
493 views
nginx fails to restart after changing “client_max_body_size”
I'm testing Wordpress on Ubuntu 14.04 with Lemp and having some issues - the latest is I'm trying to import a 30mb file into Wordpress. Doing the import it says 128M limit - which I configured in the ...
1
vote
1answer
1k views
How to change default skin from BlueSpiceSkin in MediaWiki with BlueSpice?
In a BlueSpice installation of MediaWiki, the default skin is BlueSpiceSkin and the only other choice offered is Vector. I would like Vector to be the default for all users, but do not see how to do ...
2
votes
1answer
237 views
Deny access from the server's IP address and allow www.example.com using Apache configuration
I have the following configuration in my apache2.conf
<VirtualHost *:80>
ServerAdmin webmaster@Host-Wordpress-01
DocumentRoot /var/www/wordpress_example
Servername www.example.com
...
1
vote
1answer
583 views
Bypass all rules and redirect internally to another folder/file
In Apache config file, there are some rules defines like below:
<IfModule mod_rewrite.c>
RewriteRule ^(Category)/([^/]+)/(.+)$ index.php?module=$1&id=$2&action=$3 [B,L,QSA]
...
4
votes
2answers
748 views
How to configure MediaWiki to allow uploading text/plain ".conf' files
I'm having a heck of a time getting our internal MediaWiki to allow CONF file uploads. A CONF file is just a plain text file with a *.conf extension.
In ...\LocalSettings.php, I added txt and conf to ...
2
votes
1answer
708 views
Subdomain connection time out
I created a subdomain, but the connection just times out. I checked the zone file and I have one (A)ddress record with a wild card (*) pointing to my server's IP address. As far as I understand, that'...
1
vote
1answer
279 views
How do you apply per-directory PHP.INI settings with Zend Server?
I normally like to apply some application-specific PHP.INI settings in the root of each project, but in Zend Server the following methods do NOT appear to work...
Using .htaccess with php_flag and ...
